刚买的联想IdeaPad Y330G笔记本
VISTA系统不要,换XP系统,但是盘放进去了,过一会就出现错误了。
A problem has been detected and windows has been shut down to prevent damage to your computer
If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:
Chesk for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. check your hard drive to make sure it is properly configured and terminated.
Run CHKDSK /F to check for hard dirve corruption, and then restart your computer.
Technical information:
* * * STOP: 0x0000007B
(0xF78D2524,0xC0000034,0x00000000,0x00000000)
在网上看,“客服说在开机时按F2选择bios 然后选择第二项advanced cata 把ahci选择成关闭就可以 ”,“先改一下BIOSS 先把硬盘接口改成IDE的.. 按F2进bioss 进入后选第二个选项卡(里面一共四项) 最后一项改成IDE 保存退出重新装以下就OK了.. 不行的话就打400 810 8888 联想笔记本专线..或去当地服务站.或者去购买店面”。
不知道哪个对,能怎么解决呢?
谢谢哦
笔记本式从光驱启动的。
请问“ cyxcz - 总监 九级”,"SATA Configurations"选项改为IDE,装好系统后需要改回来吗?(对于本机IdeaPad Y330来说)
不过我的天逸F41笔记本改系统的时候不需要这么设置。以前还真没碰到过这种情况。我的 Y330 只有两个选择:“AHC” 和 “Non-AHCI”。
谢谢“ cyxcz - 总监 九级”
我在网上还是查的是正确的。
“ 天_麒麟 - 经理 五级”,我知道怎么装系统,XP系统下的驱动我全部都有。
“ alwlrgf - 助理 二级”,用GHOST装不了,需要设置才行。
“ 爱护大黄 - 高级魔法师 六级”,我是从光驱启动。
“ 2817833 - 初学弟子 一级 ”,驱动程序我全部都有,在联想官方输入机身序列号就行。还有,我懂BIOS。虽说关于系统不是非常非常了解,但也不是小白,谢谢你了。
http://blog.sina.com.cn/s/blog_46562f310100cvdh.html