烦帮将“产品质量问题反馈”的中文翻译成英文，谢谢~~~~~~~~

Question

质量方面下次有需改进的地方如下:

1> 所有的线头未处理<到出都可见毛毛的线头>特别重点

2> 手工不精细

3> 车线不直<重针位不对位,没对平齐>

4> 内包边接口处位对平齐.

5> 横头布料有起皱的现象,包口拉头有掉叻现象不可用.

6> 箱底内层有杂物<线头\垃圾>

Answer 1

The next quality improvement has to be as follows:

1> of all outstanding occlusion <Maomao can be seen all out to the occlusion> with a special focus on

2> no manual fine

3> car is not straight-line <not re-pin, no flush on the>

4> package with side-bit interface to the flush.

5> Wang Tau fabric of a wrinkle, the first package I pull out there is smart is not available.

6> bottom there is debris in the inner <occlusion \ junk>