A problem has been detected and windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this stop error screen, restart your computer. If this screen oppears again, follow these steps:
Run a system diagnostic utility supplied by your hardware manufacturer. In particular, run a memory check, and check for faulty or mismatched memory. Try changing video adapters.
Disable or remove and newly installed hardware and drivers. Disable or remove any newly installed software. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup options, and then select Safe Mode.
Technical information:
*** stop: 0x0000007F(0X00000008, 0X80042000, 0X00000000, 0X00000000).
Beginning dump of physical memory.
Physical memory dump complete.
Contact your system administrator or technical support group for further assistance.
已检测出一个错误,为避免您的电脑受到损坏,视窗操作系统因此关闭。
如果这是您第一次看到该终止错误屏幕显示,重新启动您的电脑。如果该屏幕显示再次出现,请依照如下指示操作:
进行一次由硬件制造商所提供的系统诊断。特别地,要进行存储器的检测,对出错和错配存储器进行检查。尝试更换视频适配器。
卸载或删除最近安装的硬件或者驱动器。卸载或删除任何新安装的软件。如果您需要在“安全模式”下卸载或删除部件,重新启动您的电脑,按F8键,然后选择“高级启动选项”,而后选择“安全模式”。
技术报告:
*** 终止: 0x0000007F(0X00000008, 0X80042000, 0X00000000,
0X00000000).
开始清空物理内存内存储的内容。
物理内存存储内容清空完毕。
联系您的系统管理员或技术支持小组,以便获取进一步的支持。
温馨提示:答案为网友推荐,仅供参考