dos下光驱不能运行,怎么办?

一台NEC笔记本,硬盘已经格式化,裸机,比较有年头了,今天把操作系统光盘放进去后DOS下提示不能运行,
提示为:
windows 98 has detected that drive C does not contain avalid FAT or FAT32 partition.there are several possible causes.

1. the drive may need to be partitioned. to create apartition onthe drive,run FDISK from the MS-DOS command prompt.

2. you may bi using third-party disk-partitioning software.if you are using this type of software, remove,the Emergency boot disk and restart your computer. then,follow the on-screen instructions to start your computer from a floppy disk.

3. some viruses also cause your drive C to not register,you can use a virus scanning program to check your computer for viruses.

Device driver not found:'MSCD000'.
No valid CDEOM device drivers selected
Bad command or file name

提示了这些,然后下面就是C盘盘符C:\>

求解答,万分感谢
已经在BIOS里设置了,是从光驱启动的。

第1个回答  2007-01-13
你应该在bios里把启动顺序设置为先从光驱启动,
大多数笔记本进bios是在重启过程中按f2
第2个回答  2007-01-13
你硬盘的分区不是fat或者fat32的吧。本回答被提问者采纳
相似回答