你是真实设备还是模拟器..? 使用no ip routing 之后, 如果在用户模式输入show ip route是否还会出现路由表信息? 如果没出现,应该是应用成功了. 正常启用路由功能的路由表信息:Router#
Router#sh ip route
*Mar 1 00:00:51.371: %SYS-5-CONFIG_I: Configured from console by console
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static routeGateway of last resort is not setC 192.168.0.0/24 is directly connected, Loopback0
C 192.168.1.0/24 is directly connected, Loopback1 ==============no ip routing后路由表的结果.
Router#conf t
Router(config)#no ip routing
Router(config)#end
Router#sh ip route
Default gateway is not setHost Gateway Last Use Total Uses Interface
ICMP redirect cache is empty
Router#
温馨提示：答案为网友推荐，仅供参考